Battery Maintenance Management Program III


Kit Includes: SC-2 charger, PRO-12-RP charger, 390PT tester

SKU: BMP-3 Category: Product ID: 1054


Our BMP is an Easy Three Step Process
Step 1: TEST & RECOVER. Test with a 390PT Tester. Understand the state of your batteries with a detailed snapshot of their condition before you recover them. Then recover with an SC-2 Recovery Charger. 70% of dead batteries can be returned to better than new condition. Recovering only 20 batteries pays for a complete package of BMP equipment.

Step 2: TEST & MAINTAIN. Test with a 390PT Tester. Ensure batteries are ready to go back into stock. Then maintain in shop with a PRO-12-RP Maintenance System. Maintain new and restored batteries in peak condition until they are needed.

Step 3: TEST & INSTALL. Test with a 390PT Tester. Ensure batteries are in peak condition before installing. Install on vehicles with an SP-7 Solar Panel and/or Power-Pulse Maintenance System. Prevent problems and extend battery life up to three times by installing desulfators on vehicles during routine maintenance.

Additional information

Model Number


Part Number


SC-2 Charger

Input Voltage: 110-240V AC
Input Current: 2.5 Amps Max. at 100 VAC (All outputs at 6 Amps)
Input Frequency: 50-60 Hz
Output Current: 6 Amps per Channel, 12 Amps Max.
Output Voltage, Bulk Charge: 14.8 Volts
Min. Voltage for Startup: 4 Volts
Dimensions: 14.5'' x 11.75'' x 6.25''
Weight: 10 lbs
Enclosure: Black HPX Plastic
Battery Cable Length: 96'' – 14 AWB from box to battery clamps
Operating Temperature: 0° F to 130 ° F (-18° C to 54° C)
Storage Temperature: 0° F to 150° F (-18° C to 66° C)
Warranty: 1-Year Limited Warranty

PRO 12-RP Charger

Input Voltage: 100-240V AC
Input Current: 140 mA Max
Input Frequency: 50–60 Hz
Number of outputs: 12
Output Current: 750 mA
Output Voltage, Bulk Charge: 14.7 V
Min. Battery Voltage for Startup: 11.5-Volts
Dimensions: 7.25” L x 2.25” W x 1” H
Weight: 2 lbs
Box-to-Clamps Wire Length: 72”
Operating Temperature: 0º F to 130 º F (-18º C to 54º C)
Storage Temperature: 0º F to 150 º F (-18 º C to 66 º C)
Safety & Compliance: CE Compliant
Warranty: 2-Year Limited Warranty

390PT Tester

Rating System: SAE, DIN, EN, IEC, JIS Battery No.
Operation Range: 40 to 2000 CCA (SAE)
Minimum Battery Voltage for Analysis: 1.5V
Voltmeter Range: 1.5V to 30V
Internal Batteries: 1 Each 9 Volt
Dimensions: 7.8” L x 4.5” W x 2.1” H
Weight: 1.40 lbs
Battery Cable Length: 2.62’
Operating Temperature: 32º F to 122º F (0º C to 50º C)
Warranty: 1-Year Limited Warranty